山东11选5

山东11选5下注

 
         KX-HS-01 Neutral Inhibitor
         KX-HS-02 Oil-soluble Inhibitor
         Mn-base Oil Antiknock (KMMT)
         KX-GJ-02 Cetane Number Improver(E
         KX-JN-01 High-efficient Diesel Oi
         KX-CHJ Additives for Rare Earth H
         KX-DH Efficient Metal Deactivator
         Diesel Anti-Wear Agents
         KX-ZG-01 Hydrofining Inhibitor
         KX-D Hydrogen Sulfide Deodorant
         KX-CHJ-03 Cobalt Phthalocyanine
         KX-A Ferrous Sulfide Efficient Ha
         More
 
  Products

KX-HS-02 Oil-soluble Inhibitor

I. Brief Introduction of Product :
Along with the more and more severe crude oil properties processed by domestic refinery, the anti-corrosion problem has been paid more and more attention on. After years of research, the professional research team and many experts of our Company have finally solved the development problems of oil soluble corrosion inhibitor. Combine the polar group into fused ring mainly using ring amine to make the boiling point of corrosion inhibitors close to 400 ℃ and to solve the problem of the volatile decomposition in high temperature environment. Corrosion inhibitor’s high temperature and the film forming problem in high velocity. After a long time of test, we have succeeded in adding long chain on the condensed ring, then through precise compound, it can form dense and strong protective film on the metal surface, and it can inhibit the corrosion on high temperature parts effectively.

II. Product Property:
Technical Requirements and Test Method of Oil-soluble Inhibitor

Project
Quality Index
Test Method
Appearance
Uniform liquid
Visual test
Density (20 ℃ )/(kg/m3)
0.85-1.05
GB/T2540
Freezing Point / ℃ ≤
-20
GB/T510
Kinematic viscosity (40 ℃ )/(mm2/s) ≤
80.0
GB/T265
Flash Point (Closed Point )/ ℃
61
GB/T261
Base number/(mgKOH/g) ≥
100
Appendix A of SH/T0251
Rate of corrosion inhibition (Mass fraction) /% ≥
90.0
Q/SH0219

III. Application Method:
The addition can be determined according to the content of Fe ion in water, and the general charging quantity is 15 to 60 PPM. This agent can be used in winter and can be heated appropriately with steam.

IV. Package and Storage:
1. Package: Pack the product in iron drum with each drum’s net weight of 180 kg or according to the customer request .
2. Transportation: During t ransportation, it should be loaded and unloaded lightly, kept upright and separated from sun exposure .
3. Storage: It s hould be stored in a cool, ventilated and dry storeroom, away from the fire source. Its shelf life is one year .

Copyright(C)2016 ,   Copyright Notice